Cam-lok model BCL is a key operated, removable bollard post. It is designed for ram raid protection of shop fronts etc., or anywhere that unwanted vehicle access is a problem. The heavy duty post locks into the steel in-ground sleeve via an internal locking system using a high security cam lock with registered keys.
Core Drilled Sleeves:
Where sleeves are to be installed into existing concrete a hole 106mm in diameter is core drilled into the slab, the sleeve is then set into the hole using an appropriate epoxy adhesive.The bollard interlocks with the sleeve to form a burst proof connection.When the bollard is removed the hole is covered by a 6mm thick hinged flush cap.
New Concrete Sleeves:
New concrete sleeves are used where there is no existing concrete and a footing needs to be poured.Such applications would include gravel or bitumen surfaces or where the bollards need to be installed into a garden bed or grassed area.The sleeves are open to the bottom to allow for drainage and incorporate a hinged 6mm thick flush cap.
New caps & handles:
New cast aluminium handles, caps and lock shrouds finished in a silver grey metallic powder coat add a refined architectural look and improved grip to our removable bollards.
Value features:
Powder coated steelPost locks into a steel in-ground sleeve.Can be installed into existing or new concrete, bitumen or gravel.Internal locking system using high security cam locks, with security registered keys. (2 supplied per order). In-ground sleeve with hinged hole cap for pedestrian safety.Optional storage units for bollards when not in use.Other colors available on request.
Specifications:
Material: Mild steelFinish: Safety yellow powder coatDiameter (A) : 90mmHeight: Above ground (B1) 950mm.Height:Below ground (B2): 200 mm WALL THICKNESS (C): 5 mmCored Sleeve Depth (D1): 225 mm New Concrete sleeves Depth (D2): 425 mmWeight: Post 12.3kg. / Sleeve 3kg.
Locking: Internal locking mechanism with high security cam locks and registered keys.
5 year Warranty
This product carries a 5 year limited warranty against structural failure due to faulty materials or workmanship in our manufactured products, OR structural failure and major fading due to U.V. degradation in our injection moulded products.
Barrier Group Pty. Ltd. (Barrier) goods are sold with the understanding that the buyers will test them in actual use and determine for themselves the suitability for their intended use. Barrier warrants to the buyer that its products are free from defects in materials and workmanship, but limits its obligation under this warranty to replacement of the product shown to Barrier’s satisfaction to have been defective at the time Barrier sold it.
This warranty does not extend to any persons obtaining the product from the buyer. This warranty is in lieu of any other warranty, express or implied, including, but not limited, to, any implied warranty or merchant ability or fitness for a particular purpose, and of any other obligations or liability on Barrier’s part. Under no circumstances will Barrier be liable for any loss, damage, expense or consequential damages of any kind arising in connection with the use, installation, or inability to use or install Barrier products.
0412 369 552
